To turn on the plates, turn on the commutator (n°1 on picture) on the wished position,
(from 0 to 6). The pilot light (n°2 on picture) ignites. The appliance is on and is heat-
ing.
The temperature can be regulated thanks to commutator (n°1 on picture).
Commutator Pilot light on/off
5. FUNCTIONING / MANIPULATION
a) Installation / assembly
:
-
Unpack carefully the device of its packaging.
-
Place the device on a plane and heatproof surface.
-
Never place the device near a wall or near a partition makes of combustible materi-
als even if it is very well isolated.
-
A distance of minimum 10 cm with the partition or the wall is necessary.
b) First starting
:
During the first use, warm your machine up outside during about 30 min to evacuate
residual smokes of manufacturing oil from the metallic parts. This may emit a slight
smell for a few moments.
First cleaning
Clean the device before the first use. (See 6 Cleaning)
1
1
2
2
14
