Rollei Rolleivision MSC 325 P, Руководство пользователя

Страница: 44 / 72

48
Advanced
pr
ogramming
techniques
PROGRAMMING
Flashing
–> Blinking – reduced duration.
Toggling
In the »test« and »auto« modes, a slide with
the „toggling“ function entered in its pro-
gram line will be projected alternately with
the slide already on the screen. The number
of toggling cycles can be varied from 1 to
9. The toggling characteristics can be varied
with the aid of the dissolve time entered. The
timer interval selected gives the screen time
of the slide in the other channel after the
end of the toggling function. The toggling
cycle always ends with the slide in the other
channel.
Fade-in/fade-out
In this function, the previous slide will first
fade out completely before fading in again.
This is useful if two slides should not be
dissolved, for instance when changing from
horizontal to vertical format.
Fade-out – pause – fade-in
This function may be selected if the show is
to be interrupted. The previous slide is faded
out. The next slide is faded in and the show
resumes only after renewed depression of the
green forward button.
2.1.9.1 Special light functions
Fade-in/sandwich
In the »test« and »auto« modes, a slide with
the „fade-in“ special function entered in
its program line will be faded into the slide
already being projected in the other projector
channel with full brightness. The screen time
of the fade-in slide can be selected between
1 and 9 s. The fade-in and fade-out times will
depend on the dissolve time entered for that
slide. The timer interval programmed for the
slide gives the screen time of the slide in the
other channel after the end of the fade-in
function.
Freeze
In the »test« and »auto« modes, a slide with
the „freeze“ function entered in its program
line will be stopped in mid-dissolve. The
freeze time can be chosen between 1 and 9
seconds.
Blinking
In the »test« and »auto« modes, a slide with
the „blinking“ function entered in its pro-
gram line will be faded in blinking into the
slide being projected in the other projector
channel with full brightness. The number of
blinking cycles may be chosen between 1 and
9. The duration of fade-in/fade-out depends
on the dissolve time entered for the fade-in
slide, but should be kept brief in order to
preserve the impression of blinking. The timer
interval selected gives the screen time of the
slide in the other channel after the end of the
blinking function.