Rollei Rolleivision MSC 325 P, Руководство пользователя, Страница: 24 / 72

If you re-sort or temporarily remove
slides from the magazine during a
show, be sure to keep the two empty
slots free – this is where the projector
must return the slides actually being
projected!
28
OPERATION
Setting dissolve duration
The default dissolve time of the projector is
two seconds. This setting is activated when
the projector is switched on.
»
To change the dissolve time, press one
of the three buttons 14 marked »dissolve«.
Available settings are 0.1, 3 and 6 seconds.
The dissolve time entered is displayed on
41 .
(For assigning different dissolve times to the
buttons, –> page 52, item 2.2.1.)
»
The »stop/go« button
16
may also be
used to freeze a dissolve
»
and to resume dissolve by pressing it
again. The default time can then no longer be
activated.
Forward slide change:
For each forward slide change »
briefly press green button
19
once.
Reverse slide change:
For each reverse slide change, e.g. for repea-
ting a slide already shown,
»
briefly press red button 20 once.
NOTE:
Single slides can only be projected with a
magazine inserted, since the latter also has a
control function.
14
20 19
16
Pr
ojection