17
Using an SD Memory Card (optional accessory)
Images photographed with this camera will be needed to store in the SD memory card.
Without inserting the SD memory card, you won’t be able to capture image using the camera.
1. Make sure the camera is turned off.
2. Slide the SD memory card cover.
3. Insert the SD memory card.
The front side of the memory card should face
towards the front side of the camera.
If the card cannot be inserted, check the orientation.
4. Close the SD card cover.
To remove an SD memory card
1. Make sure the camera is turned off.
2. Open the SD card cover.
3. Press lightly on the edge of the memory card and it will eject.
To prevent valuable data from being accidentally
erased from an SD card you can slide the write
protect tab (on the side of the SD memory card) to
“LOCK”.
To save, edit, or erase data on an SD memory card,
you must unlock the card.
Attaching the Camera Strap
To prevent accidental dropping of the camera, always use the camera strap.
Attach the camera strap as follows:
1. Pass the end of the camera strap through the strap
attachment and fasten it to the fixture.
2. Attach the other end of the camera strap in the same
way.
LOCK
LOCK
Write protection
tab
Write protection
state