Digital Camera User’s Manual
CAUTION:
Have your Windows CD-ROM ready
beforehand, as you may be prompted to insert it during
the installation process.
Step 1: TWAIN Driver / Utility Installation
1. Insert the installation software CD into your CD-
ROM drive. Don't connect the camera to the PC.
2. The installation program should start
automatically. If not, double click the My
Computer icon on your desktop, open the CD-
ROM drive, and then run the 'setup.exe' found on
the installation CD-ROM.
3. Follow the on-screen instructions. All the necessary
software is installed automatically. The TWAIN
drivers and utility program that allow the camera
to 'talk' to the computer via the USB cable are
also installed.
Step 2: MSD / PC Camera Driver Installation
1. To install the necessary drivers for Mass Storage
Device (MSD) mode and PC Camera mode, first
set the correct operational mode for that
function. For example, set the Mode Dial to PC
Camera mode to install those drivers, and to any
other mode to install Mass Storage Device drivers.
2. Connect the small connector of the USB cable to
the camera, as shown:
26
Содержание dp300
Страница 1: ...Digital Camera User Manual 020810 ...