8
Skyline & R-Series
80 Cassette Fabrication
Step 1: Cut (use RollEase deduction charts to calculate width of cuts)
1a. Cut Headrail
1b. Cut Tube
1c. Cut Hem Bar
1d. Cut Fabric for shade and for Cassette Insert (Cassette insert should be cut 2-1/2”-2-9/16” wide,
and as long as the total length of the headrail)
Step 2: Assemble Shade per usual assembly method
2a. Attach Hem Bar to Fabric
2b. Attach Fabric to taped tube
2c. Attach Bead Chain or Cord to Clutch
2d. Attach Tension Device to Cord or Bead Chain (see Safety Hold3 Instructions)
Step 4: Insert Clutch and Idler
4a. Insert Clutch
4b. Insert Idler
4b
Step 3: Insert Fabric Strip into Cassette Headrail
3a. Apply two sided tape to headrail
3b. Insert fabric into groove in headrail, beginning on either side rolling fabric over the headrail
and slipping into the groove on the opposite side.
Slowly tuck in fabric starting at one side
of the cassette and moving to the other
3a
3b
Skyline
4a
R-Series
4b
4a
Cassette 80
