CONTENTS
This manual is to be read in conjunction with the Product Specifications & Assembly manual
SECTION NO. DESCRIPTION
PAGE NO.
SECTION 1
−
ITEMS REQUIRED
1.1
SECTION 2
−
INSTALLATION
2.1
PART A – PREPARING INSTALLATION SPACE
2.1
PART B – MOUNTING CLIP INSTALLATION
2.1
PART C – SHADE & CASSETTE INSTALLATION
2.2
PART D – PRETENSION CHECKS
2.3
PART E – SET LIMITS
2.6
SECTION 3 – INSTALLATION SCENARIOS
3.1
PART A – MULTIPLE SHADES INSTALLED SIDE-BY-SIDE
3.1
PART B – FRONT ROLL INSTALLATION
3.1
SECTION 4
− TROUBLESHOOTING
4.1
DISCLAIMER
INTRODUCTION
This Installation manual has been produced by Rollease Acmeda to supply the necessary information for safe and correct installation of this system.
INSTALLERS RESPONSIBILITY
Before installing, please read & ensure you understand the safety information and installation instructions as defined in this installation manual.
•
The Installer is responsible to ensure that all installation personnel have been adequately trained on the safe & correct installation and operation.
•
The Installer is responsible to ensure that a Job Safety Analysis or Safe Work Method Statement is completed prior to installation to identify hazards, to determine
appropriate risk control measures and to implement the control measures.
•
The Installer is responsible to ensure that supporting structures are sound and can adequately support the load.
•
The Installer is responsible to ensure that the devises used to anchor the product to the supporting structure are suitable for the application.
•
The fasteners provided are intended for fixing to timber. The installer is responsible for selecting fasteners that are suitable for other substrates
SAFETY INFORMATION
•
Ensure that electrical works are done only by a LICENSED ELECTRICIAN.
•
DO NOT modify any of the components of this system.
PERSONNEL REQUIREMENTS
Only suitably trained/qualified personnel should undertake installation.
DISCLAIMER
Rollease Acmeda has used reasonable care in preparing the information included in this document, but makes no representations or warranties as to the completeness or
accuracy of the information. Information is supplied upon the condition that the persons receiving the information will make their own determination as to its suitability for their
purposes prior to use. Rollease Acmeda assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included
herein. Rollease Acmeda reserves the right to make changes without further notice to any products to improve reliability, function or design.
COPYRIGHT
COPYRIGHT © ROLLEASE ACMEDA 2016
All rights reserved. No part of this document may be reproduced or utilized in any means, by any means, electronic or mechanical including photocopying, recordings, or by any
information storage or retrieval system, without the express permission from Rollease Acmeda.
