background image

Transforming Your Voice

5

Using the [KEY] knob to specify the key

You can specify the key that is 

used when applying an effect 

with the [ROBOT] button or the 

[AUTO PITCH] knob.

MEMO

To specify a minor scale, turn the knob 

three clicks to the right from the desired 

key indication.
For example, if you want to set the key 

to “Am,” turn the knob three clicks to the 

right from the “A” position, setting it to 

the “C” position.

Inputting Note Messages to the MIDI IN Connector

You can use note messages input via the MIDI IN connector to play the 

robot voice. You can also play the vocoder voice, or generate harmony 

notes.

1. 

Connect a MIDI keyboard or other MIDI device to the 

MIDI IN connector.

2. 

While inputting note messages from the MIDI device, 

vocalize into the mic.

The VT-4 switches to robot voice (the [ROBOT] button is lit), and the 

robot voice is sounded by the incoming note messages. (The robot 

voice turns on automatically.)

3. 

If you want to add harmony, turn the [HARMONY] button 

on, and input your voice.

Up to four notes of harmony are heard based on the note messages 

that are input.

4. 

If you want to perform with a vocoder voice, turn the 

[VOCODER] button on, and input your voice.

To exit robot voice, press the [ROBOT] button (the [ROBOT] button 

goes dark).

*  The setting of the [KEY] knob is ignored if note messages are being 

input.

Am

Bm

Cm

Dm

Em

Fm

Gm

G#m

A#m

C#m

D#m

F#m

C#

D#

F#

G#

A#

Am

Содержание VT-4













Отзывы: