On a real rotary speaker cabinet, the rate at which the speed changes from slow to fast rotation, and from fast to slow rotation is called
the rise and fall time, and is determined by the age of the motor, and condition of the belt that connects the spinning speaker to the
motor. This age characteristic can be reproduced in the V-Combo.
Adjusting the Rise Time of the Tweeter
1.
Press the [FUNCTION/ENTER] button
2.
Use the [+] button or [-] button to select rot in the screen. This will allow you to access the Rotary parameters.
3.
Press the CHOIR/SCAT button to adjust the rise time of the Tweeter.
4.
Use the [+] button or [-] button to adjust the speed of the rise time. [+] will adjust the rise time faster and [–] will adjust the rise time to be
slower.
5.
When you’ve finished editing, press the [DISPLAY/EXIT] button to return to the state of selecting a group.
6.
Press the [DISPLAY/EXIT] button once again to exit FUNCTION mode.
Adjusting the Rise Time of the Woofer
1.
Press the [FUNCTION/ENTER] button
2.
Use the [+] button or [-] button to select rot in the screen. This will allow you to access the Rotary parameters.
3.
Press the STRINGS button to adjust the rise time of the woofer.
4.
Use the [+] button or [-] button to adjust the speed of the rise time. [+] will adjust the rise time faster and [–] will adjust the rise time to be
slower.
5.
When you’ve finished editing, press the [DISPLAY/EXIT] button to return to the state of selecting a group.
6.
Press the [DISPLAY/EXIT] button once again to exit FUNCTION mode.
Adjusting the Fall Time of the Tweeter
1.
Press the [FUNCTION/ENTER] button
2.
Use the [+] button or [-] button to select rot in the screen. This will allow you to access the Rotary parameters.
3.
Press the OTHERS button to adjust the Fall time of the Tweeter.
4.
Use the [+] button or [-] button to adjust the speed of the Fall time. [+] will adjust the Fall time faster and [–] will adjust the Fall time to be
slower.
5.
When you’ve finished editing, press the [DISPLAY/EXIT] button to return to the state of selecting a group.
6.
Press the [DISPLAY/EXIT] button once again to exit FUNCTION mode.
Adjusting the Fall Time of the Woofer
1.
Press the [FUNTION/ENTER] button
2.
Use the [+] button or [-] button to select rot in the screen. This will allow you to access the Rotary parameters.
3.
Press the BASS button to adjust the Fall time of the Woofer.
4.
Use the [+] button or [-] button to adjust the speed of the Fall time. [+] will adjust the Fall time faster and [–] will adjust the Fall time to be
slower.
5.
When you’ve finished editing, press the [DISPLAY/EXIT] button to return to the state of selecting a group.
6.
Press the [DISPLAY/EXIT] button once again to exit FUNCTION mode.
V-Combo VR-700
More Stuff To Show