Roland VIMA JM-5, Руководство по реализации MIDI

Страница: 11 / 20

JM-5 MIDI Implementation
11
●
Patch parameters
❍
Patch common parameters
Parameters that apply to all Parts of each module are called “Patch Common” parameters.
Address(H) Size(H) Data (H) Parameter Description Default Value (H) Description
40 00 00 00 00 04 0018~07E8 MASTER TUNE -100.0~+100.0 [cents] 00 04 00 00 0 [cents]
40 00 01# Use nibblized data.
40 00 02#
40 00 03#
• Refer to “About the Tuning” on page 15.
40 00 04 00 00 01 00~7F MASTER VOLUME 0~127 7F 127
(= F0 7F 7F 04 01 00 vv F7)
40 00 05 00 00 01 28~58 MASTER KEY-SHIFT -24~+24 [semitones] 40 0 [semitones]
40 00 06 00 00 01 01~7F MASTER PAN -63 (LEFT)~+63 (RIGHT) 40 0 (CENTER)
40 00 7F 00 00 01 00 MODE SET 00 = GS Reset (Rx. only)
40 01 30 00 00 01 00~07 REVERB MACRO 00: Room 1
01: Room 2
02: Room 3
03: Hall 1
04: Hall 2
05: Plate
06: Delay
07: Panning Delay 04 Hall 2
40 01 31 00 00 01 00~07 REVERB CHARACTER 0~7 04 4
40 01 32 00 00 01 00~07 REVERB PRE-LPF 0~7 00 0
40 01 33 00 00 01 00~7F REVERB LEVEL 0~127 40 64
40 01 34 00 00 01 00~7F REVERB TIME 0~127 40 64
40 01 35 00 00 01 00~7F REVERB DELAY FEEDBACK 0~127 00 0
40 01 37 00 00 01 00~7F REVERB PREDELAY TIME 0~127 [ms] 00 0
• REVERB MACRO is a macro parameter that allows global setting of reverb parameters. When you select the reverb type with REVERB MACRO, each
reverb parameter will be set to their most suitable value.
• REVERB CHARACTER is a parameter that changes the reverb algorithm. The value of REVERB CHARACTER corresponds to the REVERB MACRO of
the same number.
Address(H) Size(H) Data (H) Parameter Description Default Value (H) Description
40 01 38 00 00 01 00~07 CHORUS MACRO 00: Chorus 1
01: Chorus 2
02: Chorus 3
03: Chorus 4
04: Feedback Chorus
05: Flanger
06: Short Delay
07: Short Delay(FB) 02 Chorus 3
40 01 39 00 00 01 00~07 CHORUS PRE-LPF 0~7 00 0
40 01 3A 00 00 01 00~7F CHORUS LEVEL 0-127 40 64
40 01 3B 00 00 01 00~7F CHORUS FEEDBACK 0-127 08 8
40 01 3C 00 00 01 00~7F CHORUS DELAY 0-127 50 80
40 01 3D 00 00 01 00~7F CHORUS RATE 0-127 03 3
40 01 3E 00 00 01 00~7F CHORUS DEPTH 0-127 13 19
40 01 3F 00 00 01 00~7F CHORUS SEND LEVEL TO
REVERB 0-127 00 0
40 01 40 00 00 01 00~7F CHORUS SEND LEVEL TO
DELAY 0-127 00 0
• CHORUS MACRO is a macro parameter that allows global setting of chorus parameters. When you select the chorus type with CHORUS MACRO, each
chorus parameter will be set to their most suitable value.