Roland VersaCAMM ECO-SOL MAX3, Инструкция по эксплуатации

Страница: 4 / 21

4
ECO-SOL MAX 3 Ink Switching Method
Preparation before Operations
STEP 1: Checking the Package Contents
This kit contains the following items. Make sure they are all present and accounted for.
Items used during ink switching
Cleaning sticks Tweezers (1) Gloves (1 set) Wipers (2)
Felt wipers (2) Drain bottles (2) Drain funnel (1)
Items used after ink switching (not used during ink switching)
Cleaning liquid (1)
(dedicated for use with
MAX 3 ink)
STEP 2: Checking the Necessary Files
The firmware and updater downloaded from http://www.rolanddg.com/ecosolmax3/ are necessary for the operations in
this manual.
Check that the following files are present.

Firmware: XF640Firm240.exe (in the "Firmware" folder)

Updater: LocalUpdater.exe (Ver. 5.5.0 or later; in the "Roland VersaWorks local updater" folder)
If the above files are not present, download them from the following URL.
http://www.rolanddg.com/ecosolmax3
STEP 3: Writing a Memo with the VersaWorks Settings
Important
As the final step when you switch the ink, update VersaWorks to a version that supports MAX 3 ink. After the update, because
the printer that has been switched to MAX 3 ink will be connected as a new printer, the previous job data and settings will
be deleted. Write down the IP address and the settings of the connected printer such as "Quality."