background image

3

IMPORTANT NOTES

Placement

 

6

Do not expose the unit to direct sunlight, place it near devices 

that radiate heat, leave it inside an enclosed vehicle, or 

otherwise subject it to temperature extremes. Excessive heat can 

deform or discolor the unit.

 

6

Do not allow rubber, vinyl, or similar materials to remain on 

the unit for long periods of time. Such objects can discolor or 

otherwise harmfully affect the finish.

Maintenance

 

6

For everyday cleaning wipe the unit with a soft, dry cloth or 

one that has been slightly dampened with water. To remove 

stubborn dirt, use a cloth impregnated with a mild, nonabrasive 

detergent. Afterwards, be sure to wipe the unit thoroughly with 

a soft, dry cloth.

 

6

Never use benzine, thinners, alcohol or solvents of any kind, to 

avoid the possibility of discoloration and/or deformation.

Additional Precautions

 

6

 Use a reasonable amount of care when using the unit’s 

buttons, sliders, or other controls; and when using its jacks and 

connectors. Rough handling can lead to malfunctions.

 

6

When connecting / disconnecting all cables, grasp the connector 

itself—never pull on the cable. This way you will avoid causing 

shorts, or damage to the cable’s internal elements.

 

6

When you need to transport the unit, package it in the box 

(including padding) that it came in, if possible. Otherwise, you 

will need to use equivalent packaging materials.

 

6

Due to the nature of the materials used in the sensor, changes in 

room temperature may affect the sensitivity of the sensor.

 

6

Roland and V-Drums are either registered trademarks or 

trademarks of Roland Corporation in the United States and/or 

other countries.

Before using this unit, carefully read the sections entitled: 

“USING THE UNIT SAFELY”

 and 

“IMPORTANT NOTES.”

 

These sections provide important information concerning the proper operation of the unit. Additionally, in order 

to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s Manual 

should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.

Copyright © 2017 ROLAND CORPORATION

Содержание V-Drums V-PAD PDX-8









Отзывы: