16
USING THE UNIT SAFELY
1.
Use the tuning key supplied with the FD-8 to
tighten the stopper bolt.
The stopper keeps the CY-12R/C from turning, and
prevents the cables from catching or getting tangle on the
stand.
2.
Attach the CY-12R/C so the unit is oriented as
shown in the diagram (bolt should be opposite
the output jacks).
3.
Tighten the wing nut to obtain the desired
movement.
Use the included felt washer and the wing nut.
• Double sounding may occur if the wing nut is loose.
When connecting the CY-12R/C, use the BOW/EDGE
output jack, and connect it to Trigger Input 11 (RIDE).
* Use the BOW/EDGE output jack only. If you insert the cables
to both 2 output jacks (BOW/EDGE and BOW/BELL), you
have two different trigger inputs sounds simultaneously.
CY-12R/C
(Ride Cymbal)
Attaching the V-Cymbal to the
Cymbal Mount
Bell
Bow
Edge
Wing Nut
Felt Washer
Stopper
BOW/EDGE
Output Jack
BOW/BELL
Output Jack
Stopper
(Be sure to orient
it correctly)
Tighten the bolt
with a tuning key
Connecting to the TD-6V Sound
Module
Wing Nut
Felt Washer
• With factory settings on the TD-6V, you can play the
bow and edge sounds.
• There are some ride sounds on the TD-6V that has a
“velocity crossfade.” You can switch the “bow” and
“bell” sounds with controlling the velocity.
TD-6KX_e 16 ページ ２００７年６月２０日 水曜日 午前１１時２９分
