background image

Performing

18

Developing Internal Timing Sense (QUIET COUNT)

This lets you practice keeping the tempo with your body. For the first 

few measures, the click is heard at the specified volume, but for the 

next few measures the click is not heard. This cycle of several measures 

will continue until you stop it.

1 . 

In the QUIET COUNT screen, press the [F5] (START) 

button.

2 . 

Strike the pad in time with the click.

 

5

The click will sound during the first few measures. When you reach 

the last measure during which the click will sound, the screen will 

indicate 

“Ready . .”

 

5

When the click stops sounding, the screen indication will change to 

“Quiet .”

 Continue striking the pads during this time.

 

5

After the Quiet region, the proportion of your strikes that were 

played at an accurate tempo are shown as a 

“% .”

 

3 . 

Press the [F4] (STOP) button.

4 . 

Press the [EXIT] button to finish.

WARM UPS

In this mode you’ll successively practice steps 1–3, be graded on your 

performance at each step, and then receive a final evaluation.
You can choose one of three courses (5/10/15 minutes), ranging from 

easy to difficult. You can also adjust the tempo according to your level 

of skill.

MEMO

After starting WARM UPS, you can press the [F5] (PAUSE) button to 

pause or resume.
While paused, you can press the [F4] (STOP) button to stop.

1 . 

In the WARM UPS screen, press the [F5] (START) 

button.

Step 1: Change-Up

In this step, the rhythm type will change every two measures.
Starting from half notes, the note values will gradually become 

shorter, and will then return to half notes; this change in rhythms 

will be repeated.

Step 2: Auto Up/Down

The tempo will gradually be raised and lowered.
The tempo will increase by 1 BPM (beat-per-minute) for each beat 

until the click reaches the upper limit; then the tempo will continue 

slowing down by 1 BPM until it reaches the initial tempo.

*  Auto Up/Down will be executed if Duration is 10 MINS or 15 MINS.
*  Auto Up/Down does not let you use the 

[TEMPO]

 knob to adjust 

the current tempo.

*  The current tempo value will be the lower tempo limit.

Step 3:Time Check

At this step, the accuracy of your playing will be checked against 

the click. You can see in the screen if you are ahead, behind or on 

the beat.

Overall evaluation

This grades your performance at each step, and displays the overall 

evaluation.
To resume practicing, press the [F5] (RETRY) button.

Evaluation (display)

EXCELLENT!, VERY GOOD!, GOOD, AVERAGE, 

START OVER

2 . 

Press the [EXIT] button to finish.

Содержание V-Drums TD-50X































Отзывы: