background image

 

3

 

291a

 

In addition to the items listed under “USING THE UNIT 

SAFELY” on page 2, please read and observe the 

following:

 

Placement

 

354a

 

Do not expose the unit to direct sunlight, place it near 
devices that radiate heat, leave it inside an enclosed 
vehicle, or otherwise subject it to temperature extremes. 
Excessive heat can deform or discolor the unit.

 

356

 

Do not allow rubber, vinyl, or similar materials to remain 
on the unit for long periods of time. Such objects can 
discolor or otherwise harmfully affect the finish.

 

Maintenance

 

401a

 

For everyday cleaning wipe the unit with a soft, dry cloth 
or one that has been slightly dampened with water. To 
remove stubborn dirt, use a cloth impregnated with a 
mild, non-abrasive detergent. Afterwards, be sure to wipe 
the unit thoroughly with a soft, dry cloth.

 

402

 

Never use benzine, thinners, alcohol or solvents of any 
kind, to avoid the possibility of discoloration and/or 
deformation.

 

Additional Precautions

 

553

 

Use a reasonable amount of care when using the unit’s 
buttons, sliders, or other controls; and when using its jacks 
and connectors. Rough handling can lead to malfunctions.

 

556

 

When connecting / disconnecting all cables, grasp the 
connector itself—never pull on the cable. This way you 
will avoid causing shorts, or damage to the cable’s 
internal elements.

 

558a

 

To avoid disturbing your neighbors, try to keep the unit’s 
volume at reasonable levels. You may prefer to use 
headphones, so you do not need to be concerned about 
those around you (especially when it is late at night).

 

558d

 

This instrument is designed to minimize the extraneous 
sounds produced when it’s played. However, since sound 
vibrations can be transmitted through floors and walls to a 
greater degree than expected, take care not to allow these 
sounds to become a nuisance to neighbors, especially 
when performing at night and when using headphones.

 

IMPORTANT NOTES

TD-3KW_e 3 ページ 2006年1月24日 火曜日 午後6時7分

Содержание V-Compact TD-3KW

















Отзывы: