manualshive.com logo in svg

Roland V-Bass 04672434, Руководство пользователя, Страница: 118 / 184

Поделиться
Скачать
Roland V-Bass 04672434 Скачать руководство пользователя страница 118

 

118

Chapter 8 Parameters Guide                                                                        FX (Effects)

PEDAL WAH

 

This is a wah effect that you control in real time by adjusting the EXP 
pedal connected to the EXP PEDAL jack or an FC-300 EXP pedal.

 

T.WAH (Touch Wah)

 

This is an automatic wah effect where the filter changes in response 
to the bass level.

 

Parameter/
Range

Explanation

 

TYPE

 

Selects the type of wah.

CRY WAH

This models the sound of the CRY BABY 
wah pedal popular in the `70s.

VO WAH

This models the sound of the VOX V846.

FAT WAH

This a wah sound featuring a bold tone.

LIGHT WAH

This wah has a refined sound with no un-
usual characteristics.

BASS WAH

This wah has been specially adapted for use 
in the bass registers. Inclusion of the low-
frequency range in the wah sound produces 
a robust wah effect, with no dilution of the 
sound.

RESO WAH

This completely original effect offers en-
hancements on the characteristic resonances 
produced by analog synth filters.

 

PEDAL POS (Pedal Position)

 

0–100

Adjusts the position of the wah pedal.

 

* This parameter is usually assigned to an 

expression pedal or the like for use.

 

PEDAL MIN (Pedal Minimum)

 

0–100

Selects the tone produced when the heel of 
the EXP Pedal is depressed.

 

PEDAL MAX (Pedal Maximum)

 

0–100

Selects the tone produced when the toe of 
the EXP Pedal is depressed.

 

EFFECT LEVEL

 

0–100

Adjusts the volume.

 

DIRECT LEVEL

 

0–100

Adjusts the volume of the direct sound.

 

Parameter/
Range

Explanation

 

MODE

 

Selects the wah mode.

LPF (Low Pass Filter)

This passes only the low band. 

BPF (Band Pass Filter) This passes only a specific band. 

 

POLARITY

 

Selects the direction in which the filter will change in response to the 
input.

DOWN

The frequency of the filter will fall.

UP

The frequency of the filter will rise.

 

SENS (Sensitivity)

 

0–100

Adjusts the sensitivity at which the filter 
will change in the direction determined by 
the polarity setting.
Higher values will result in a stronger re-
sponse. With a setting of 0, the strength of 
playing will have no effect.

 

FREQ (Frequency)

 

0–100

Adjusts the center frequency of the Wah ef-
fect.

 

PEAK

 

Higher values will produce a stronger tone which emphasizes the 
wah effect more.

0–100

Adjusts the way in which the wah effect ap-
plies to the area around the center frequen-
cy. With a value of 50 a standard wah sound 
will be produced.

 

LEVEL

 

0–100

Adjusts the volume of the effect sound.

 

DIRECT LEVEL

 

0–100

Adjusts the volume of the direct sound.

VB-99_e.book 118 ページ ２００８年８月１８日　月曜日　午後１時１０分

Содержание V-Bass 04672434

























































































































































































Отзывы:

Нет отзывов