Roland V-Bass 04672434 Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 184

Roland V-Bass 04672434 Скачать руководство пользователя страница 104

104

Chapter 8 Parameters Guide COSM BASS

CRYSTL

ORGAN

BRASS

Parameter/
Range

Explanation

MASTER LEVEL

0–100

Sets the volume.

ATTACK LENGTH

0–100

This sets the decay time for the attack por-
tion of the sound. A smaller setting results
in a shorter attack.

MOD TUNE (Modulation Tune)

0–100

This sets the tuning for the modulation ap-
plied to the attack.

MOD DEPTH (Modulation Depth)

0–100

This sets the depth of the modulation ap-
plied to the attack. Larger values result in
deeper undulations.

ATTACK LEVEL

0–100

This sets the volume level of the attack portion.

BODY LEVEL

0–100

This sets the volume level for the sustained
portion of the sound.

SUSTAIN

0–100

Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.

Parameter/
Range

Explanation

MASTER LEVEL

0–100

Sets the volume.

FEET 16’

0–100

This is a long tone at the same pitch as the bass.

FEET 8’

0–100

This is a long tone one octave lower than the
bass.

FEET 4’

0–100

This is a long tone two octave higher than
the bass.

SUSTAIN

0–100

Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.

Parameter/
Range

Explanation

MASTER LEVEL

0–100

Sets the volume.

FILTER CUTOFF

0–100

Adjusts the cutoff frequency, setting the
brightness (hardness) of the sound. The
sound gets brighter (harder) as the value is
raised.

FILTER RESO (Filter Resonance)

0–100

Adjusts the resonance (distinctiveness of the
sound). As the value is increased, sounds in
the frequency range near the cutoff frequen-
cy are boosted, making the sound more dis-
tinctive and unique.

TOUCH SENS (Touch

Sensitivity)

0–100

This sets the sensitivity when the filter is
shifted according to the playing. The shift-
ing of the filter caused by the playing in-
creases as the value is raised. When the
value is set to 0, the filter remains set, with
no movement.

SUSTAIN

0–100

Adjusts the range (time) over which low-
level signals are boosted. Larger values will
result in longer sustain.

VB-99_e.book 104 ページ２００８年８月１８日　月曜日　午後１時１０分

«
...
102
103
104
105
106
...
»

Содержание V-Bass 04672434

























































































































































































Отзывы:

Нет отзывов