Roland V-ACCORDION FR-5, Руководство пользователя

Страница: 58 / 92

Editing sounds | SET COMMON parameters
58
r
FR-7/FR-5 V-Accordion
7.7 Name
This function allows you to
name the selected Set (8 char-
acters). It would be a good idea
to use the name of the instru-
ment you “built” using the TRE-
BLE, BASS, FREE BASS, etc., group parameters – or the
name of the Song you wish to use this Set for.
(1) Select the character position (indicated by a dark
square) by pressing
[UP]
(previous character),
[DOWN]
(next character) or the
[DATA÷ENTER]
knob
(next character).
(2) Turn the
[DATA÷ENTER]
knob to select the desired
character.
• Press
[UP]
and
[DOWN]
simultaneously to erase the
currently selected character (it will become a space).
Example: To replace the period (“.”) in “Fr.Folk” with a
space (“Fr Folk”), position the cursor on the “.” and
simultaneously press
[UP]
/
[DOWN]
.
• To insert insert a space before the currently selected
character and push all subsequent characters one
position to the right, select the character that should
follow the space, then press and hold
[UP]
. Example:
To insert a space after the “.” in “Fr.Folk” (creating the
name “Fr. Folk”), position the cursor on the “.” and
hold down
[UP]
for a while.
Note: If the name already contains 8 characters (“Bandoneo”),
the last character is erased (example: “Band one”).
• To delete the character indicated by the cursor and
move subsequent characters one position to the left,
select it (example: “Fr.Folk”) and press and hold
[DOWN]
(“FrFolk”).
7.8 Master Bar Recall
This parameter allows you to
choose the Treble register (1~
14) that can be activated by
pressing the Master bar. Note
that this is only possible while
the Treble section is in Solo mode (page 24) or while
the Orchestra part is set to “CANCEL”.
In all other cases (Dual, High, Low modes), the Master
bar is indeed used to mute the Orchestra part. And in
Solo mode, the first press allows you to return from the
Orchestra (if it’s on) to the Treble section.
7.9 Icon
This parameter allows you to
assign an icon to your Set,
which is displayed above its
name on the Main page. In most
cases, you will probably choose
a picture that somehow illustrates the contents of your
settings, but that is entirely up to you.
The FR-7/FR-5 contains 23 preset icons (stored in its
internal memory). There are, however, additional mem-
ories (24~40) to which you can load new icons using a
special MIDI function (page 75).
Note: By default, icon memories 24~40 already contain pictures
you can use. But you can replace them with new graphics if you
like.