Roland V-800HD MKII Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 64

background image

53

Appendices

The V-800HD supports remote control via MIDI and the RS-232C interface, enabling you to operate the unit remotely from an
external device. When performing remote control, download “Remote Control Guide” from the following Roland website.

http://www.rolandsystemsgroup.net/

fig.MVC-logo.eps

The V-800HD can be operated remotely from a device that supports MIDI Visual Control. MIDI Visual Control is a feature that uses
MIDI to link visual expression to a musical performance.

About Rack-mount Angles

When using the unit installed with the rack-mount angles, remove the screws at the locations shown in the figure below (at 3
locations on each side, for a total of 6) at first and install the angles with original screws.

fig.angle-screws.eps

When installing or detaching the rack-mount angles, give attention to the following precautions.

• Before removing any screws, turn off the power to the V-800HD and detach the power cord and all connection cables.

• Be sure to block the screw holes with the removed screws.

• Never use any screws except the removed ones to block the screw holes. Using other screws may cause malfunction.

• When installing the rack-mount angles, turn off the power to the V-800HD and detach the power cord and all connection cables. Also, be sure

to install using the original screws.

Mounting in a 19-inch Rack

When mounting the unit in a rack, observe the following precautions.

• The video fader protrudes beyond the mounting surface of the rack. Take care not to damage it when mounting the unit.

• To prevent incorrect operation or malfunction, take care not to subject areas protruding beyond the rack to accidental impact.

• To ensure room for connectors and cables as well as space around the ventilation ports, ensure 2U of clearance above the unit.

• Before mounting, turn off the power to the V-800HD and detach the power cord and all connection cable.

• Use all threaded holes (at 4 locations on each side, for a total of 8) to secure the unit to the rack using screws. (Screws for rack-mounting are not

included.)

• When mounting the unit in the rack, use due caution to ensure that your fingers do not get caught or pinched between a rack-mount angle and

the rack.

The included input template indicates the factory-default correspondences between cross-points and input channels. Use it
attached at the location shown below.

fig.input-template.eps

About Remote Control

About Rack Mounting

About the Input Template

«
...
51
52
53
54
55
...
»

Содержание V-800HD MKII

































































Отзывы:

Нет отзывов

Похожие инструкции для V-800HD MKII

ATLONA Omega AT-OME-MS52W

Бренд: Panduit Страницы: 123

Atlona AT-OME-MS42

Бренд: Panduit Страницы: 86

Бренд: National Instruments Страницы: 32

Бренд: Kramer Страницы: 61

SwitchView SC8 DVI

Бренд: Avocent Страницы: 2

Бренд: steute Страницы: 20

Бренд: GHIELMETTI Страницы: 12

Бренд: Crestron Страницы: 2

Бренд: PRO SIGNAL Страницы: 2

kontron KSwitch D3 UM

Бренд: S&T Страницы: 38

Бренд: Foxun Страницы: 7

Бренд: JDS Uniphase Страницы: 113

Бренд: 3onedata Страницы: 3

Бренд: Pulsar Страницы: 5

Бренд: Fujitsu Страницы: 374

FS-1008MT Series

Бренд: Fujitsu Страницы: 5

Quick-View QV Series

Бренд: ProxiMity Страницы: 2

H4SMK - DSB Hub

Бренд: D-Link Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды