background image

4

USING THE UNIT SAFELY

 WARNING

Do not allow foreign objects or liquids to enter  

unit; never place containers with liquid on unit

Do not place containers containing liquid (e.g., 

flower vases) on this product. Never allow 

foreign objects (e.g., flammable objects, coins, 

wires) or liquids (e.g., water or juice) to enter 

this product. Doing so may cause short circuits, 

faulty operation, or other malfunctions.

Turn off the unit if an abnormality or malfunction occurs

Immediately turn the unit off, remove the AC 

adaptor from the outlet, and request servicing 

by your retailer, the nearest Roland Service 

Center, or an authorized Roland distributor, as 

listed on the “Information” when:

• 

The AC adaptor or the power cord has been damaged; or

• 

If smoke or unusual odor occurs; or

• 

Objects have fallen into, or liquid has been spilled 

onto the unit; or

• 

The unit has been exposed to rain (or otherwise has 

become wet); or

• 

The unit does not appear to operate normally or 

exhibits a marked change in performance.

Be cautious to protect children from injury

Always make sure that an adult is on hand to 

provide supervision and guidance when using 

the unit in places where children are present, 

or when a child will be using the unit.

Do not drop or subject to strong impact

Otherwise, you risk causing damage or 

malfunction.

Do not share an outlet with an unreasonable  

number of other devices

Otherwise, you risk overheating or fire.

Do not use overseas

Before using the unit in overseas, consult with 

your retailer, the nearest Roland Service Center, 

or an authorized Roland distributor, as listed on 

the “Information.”

 CAUTION

When disconnecting the power cord, grasp it by the plug

To prevent conductor damage, always grasp 

the power cord by its plug when disconnecting 

it from this unit or from a power outlet.

Periodically clean the power plug

An accumulation of dust or foreign objects 

between the power plug and the power outlet 

can lead to fire or electric shock.
At regular intervals, be sure to pull out the 

power plug, and using a dry cloth, wipe away any dust or 

foreign objects that may have accumulated.

 CAUTION

Disconnect the power plug whenever the unit will not be 

used for an extended period of time

Fire may result in the unlikely event that a 

breakdown occurs.

Route all power cords and cables in such a way as to prevent 

them from getting entangled

Injury could result if someone were to trip on a 

cable and cause the unit to fall or topple.

Avoid climbing on top of the unit, or placing heavy objects 

on it

Otherwise, you risk injury as the result of the 

unit toppling over or dropping down.

Never connect/disconnect a power plug if your hands are 

wet

Otherwise, you could receive an electric shock.

Disconnect all cords/cables before moving the unit

Before moving the unit, disconnect the power 

plug from the outlet, and pull out all cords 

from external devices.

Before cleaning the unit, disconnect the power plug from 

the outlet

If the power plug is not removed from the 

outlet, you risk receiving an electric shock.

Whenever there is a threat of lightning, disconnect the 

power plug from the outlet

If the power plug is not removed from the 

outlet, you risk receiving an electric shock.

Keep small items out of the reach of children

To prevent accidental ingestion of the parts 

listed below, always keep them out of the 

reach of small children.

• 

Included Parts: Cord Hook (p. 2)

• 

Removable Parts: Screw (p. 9, 10)

Handle the ground terminal carefully

If you remove the screw from the ground 

terminal, be sure to replace it; don’t leave it 

lying around where it could accidently be 

swallowed by small children. When refastening 

the screw, make that it is firmly fastened, so it won’t 

come loose.

Содержание V-1SDI









































Отзывы: