Roland V-1SDI, Руководство пользователя

Страница: 13 / 40

13
Basic Operation
Saving/Recalling Settings (Memory)
You can take the current settings, including video and audio settings and the state of the operation panel, and save
them as a single set in memory, for later recall and use when needed. The V-1SDI is provided with eight memories.
Settings Saved in Memory
The following menu settings and operation-panel
states are saved in the memories (1 through 8).
SETUP Menu Settings (Some)
The settings from VIDEO INPUT (page 1/16) to DSK
(page 8/16) are saved.
AUDIO Menu Settings (All)
State of the Operation Panel
State of the [OUTPUT FADE] knob
State of the [CONTROL 1] and [CONTROL 2] knobs
On/off status of the [PinP] and [SPLIT] buttons
[A-1] through [A-4] button selection
[B-1] through [B-4] button selection
On/off status of the [KEY LEVEL] button
[MIX], [WIPE], and [CUT] button selection
On/off status of the [DSK] button
State of the A/B fader
MEMO
5
The SETUP menu settings from PANEL (page 9/16)
through SYSTEM (page 16/16) are not saved in memory.
Only a single set is saved in the unit.
After settings have been changed, they are saved in the
unit when you exit the menu.
5
You can recall settings at a specified memory number
at startup. To specify the memory number you want
to recall, go to the SETUP menu, and at MEMORY
(page 13/16), use “POWER ON LOAD.”
5
By default, the state of the operation panel is updated
when you recall a memory.
To keep the state of the operation panel from being
updated, go to the SETUP menu, and at MEMORY
(page 13/16), set “MEMORY PANEL LOAD” to “OFF.”
Saving/Recalling
The memory function is turned on while the
[MEMORY] button is held depressed.
At this time the [A-1] through [A-4] and [B-1] through
[B-4] buttons function as memory selection buttons
1 through 8.
The currently selected button lights up in blue.
Memory number
1–4
5–8
Memory 1 functions as a Last Memory.
By factory default, memory 1 functions as a Last Memory.
The current settings are automatically saved in memory 1
when you exit a menu or recall a memory.
To stop using the Last Memory function, go to the SETUP
menu, and at MEMORY (page 13/16), set “AUTO MEMORY”
to “OFF.”
Saving
NOTE
5
When memory 1 has been selected as a destination for
saving, the values saved there might be overwritten by
the Last Memory function.
1.
Hold down the [MEMORY] button and press and
hold (for 2 seconds or longer) the button from
[A-1] though [A-4] and [B-1] through [B-4] for the
number where you want to save the settings.
The [A-1] through [A-4] and [B-1] through [B-4]
buttons all briefly light up in blue, and the
current settings are saved.
2.
To turn off the memory function, release the
[MEMORY] button.
Recalling
1.
Hold down the [MEMORY] button and press
the button from [A-1] though [A-4] and [B-1]
through [B-4] for the number where you want to
recall the settings.
The settings are recalled. The currently selected
button lights up in blue.
2.
To turn off the memory function, release the
[MEMORY] button.