background image

13

Sep. 2009

SP-404SX

Backing Up, Restoring, and 
Copying Values on a Customer 
SD Card

If you have received from the customer the included SD card together with the 
unit and are making use of the card to carry out testing, back up the values 
saved on the SD card to a computer, then restore the backed-up values as 
required. You can also use a different SD card to create a copy.

Items Required

Computer (running Windows XP)

SD card reader/writer

SD card received from the customer

When making a copy, the following is also required

SD card (blank) of larger capacity than the customer’s SD card

Procedure

Backing Up a Customer SD Card onto a Computer

1.

Insert the customer SD card into the SD card reader/writer connected to 
the computer.

2.

Copy all files and folders on the SD card in their entirety to the 
computer’s hard drive.

Restoring or Copying Data on the SD Card

3.

On the SP-404SX, format the SD card to be returned to the customer. (If 
you’re making a copy, use a blank SD card.)

4.

Insert the formatted SD card into the SD card reader/writer connected to 
the computer.

5.

Copy the data saved in step 

2

 in its entirety to the root directory of the SD 

card.

Backing Up/Restoring Settings 
Saved on the Main Board

Making a Written Record of Settings Saved 
on the Main Board (Backup)

The method used to make a written record of the parameter settings saved on 
the Main Board is described below.

1.

Eject the SD card.

2.

Hold down [FUNC] and turn on the power switch on the rear panel, and 
write down the type of battery displayed.

3.

Switch the power off, then back on again.

4.

Hold down [FUNC] and press [7], then write down the value displayed 
for the 

ILLUMINATION

 setting.

5.

Hold down [FUNC] and press [8], then write down the value displayed 
for the 

EFFECT LIMIT

 setting.

6.

Hold down [FUNC] and press [10], then write down the value displayed 
for the 

MIDI SYNC

 setting.

7.

Hold down [FUNC] and press [11], then write down the value displayed 
for the 

INPUT GAIN

 setting.

8.

Hold down [FUNC] and press [12], then write down the value displayed 
for the 

OUTPUT GAIN

 setting.

9.

Switch off the power.

Returning Settings to the Main Board 
(Restore)

This describes the procedure for restoring setting values written down in the 
previous section.

1.

Eject the SD card.

2.

Hold down [FUNC] and turn on the power switch on the rear panel.

3.

Turn the [CTRL 3] control to set the battery type.

4.

Switch the power off, then back on again.

5.

Hold down [FUNC] and press [7].

6.

Turn the [CTRL 3] control to set the 

ILLUMINATION

 value.

7.

Hold down [FUNC] and press [8].

8.

Turn the [CTRL 3] control to set the 

EFFECT LIMIT

 value.

9.

Hold down [FUNC] and press [10].

10.

Turn the [CTRL 3] control to set the 

MIDI SYNC

 value.

11.

Hold down [FUNC] and press [11].

12.

Turn the [CTRL 3] control to set the 

INPUT GAIN

 value.

13.

Hold down [FUNC] and press [12].

14.

Turn the [CTRL 3] control to set the 

OUTPUT GAIN

 value.

15.

Switch off the power.

Содержание SP-404SX



























Отзывы: