
84
Effects
PH Reso (Phaser Resonance)
0–127 [4 (40 03 06)]
Adjusts the emphasis for the region around the center
frequency specified by the PH Man parameter.
PH Mix (Phaser Mix Level)
0–127 [5 (40 03 07)]
Adjusts the proportion of the phase-shifted sound that will
be mixed with the direct sound.
PH Pan (Phaser Output Pan) L63–0–R63 [16 (40 03 12)]
Sets the stereo location of the phaser sound. L63 is far left, 0
is center, and R63 is far right.
PH Level (Phaser Level)
0–127 [17 (40 03 13)]
Adjusts the volume of the phaser sound.
●
AW (Auto-wah)
AW Filter (Auto-wah Filter Type) LPF/BPF [6 (40 03 08)]
Selects the type of filter for the auto-wah.
LPF:
The wah effect will be produced over a broad
frequency range.
BPF:
The wah effect will be produced over a
narrow frequency range.
AW Sens (Auto-wah Sensitivity)
0–127 [7 (40 03 09)]
Adjusts the sensitivity with which the auto-wah filter will
be modulated.
#AW Man (Auto-wah Manual)
0–127 [8 (40 03 0A)]
Sets the center frequency at which the auto-wah effect will
be produced.
AW Peak (Auto-wah Peak)
0–127 [9 (40 03 0B)]
Adjusts the way in which the wah effect will be applied to
the region of the center frequency. Lower settings will
produce a wah effect in a broad area around the center
frequency, and higher settings will produce a wah effect in
a narrower area around the center frequency.
AW Rate (Auto-wah Rate)
0.05–10.0 [10 (40 03 0C)]
Adjusts the modulation speed of the auto-wah.
AW Depth (Auto-wah Depth)
0–127 [11 (40 03 0D)]
Adjusts the modulation depth of the auto-wah.
AW Pol (Auto-wah Polarity)
Down/Up [12 (40 03 0E)]
Sets the direction in which the frequency will change when
the auto-wah filter is modulated. With a setting of Up, the
filter will change toward a higher frequency. With a setting
of Down it will change toward a lower frequency.
AW Pan (Auto-wah Output Pan)L63–0–R63 [18 (40 03 14)]
Adjusts the stereo position of the auto-wah sound. L63 is
far left, 0 is center, and R63 is far right.
AW Level (Auto-wah Level)
0–127 [19 (40 03 15)]
Adjusts the volume of the auto-wah sound.
Level (Output Level)
0–127 [20 (40 03 16)]
Adjusts the output level.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
When using 3D effects
The following four 3D effects utilize RSS (Roland Sound
Space) technology to create a spaciousness that cannot be
produced by delay, reverb, chorus, etc.
20: 3DChorus
28: 3DDelay
31: 3DAuto
32: 3DManual
When using these effects, we recommend that you place your
speakers as follows. Also, make sure that the speakers are at
a sufficient distance from the walls on either side.
fig.9-70
If the left and right speakers are too far apart, or if there is too
much reverberation, the full 3D effect may not appear.
Each of these effects has an
Out (Output Mode)
parameter. If
the sound from the OUTPUT jacks is to be heard through
speakers, set this parameter to Speaker. If the sound is to be
heard through headphones, set it to Phones. This will ensure
that the optimal 3D effect will be heard. If this parameter is
not set correctly, the full 3D effect may not appear.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
30˚
30˚
Содержание Sound Canvas SC-8820
Страница 2: ......