4. Assembly and Ink Filling
15
Step 3: Installing the Media Holders
1.
Attach the arms.
Temporarily tighten two bolts on the stand leg.
Tighten the bolts until they protrude by approximately 10 mm (0.4 in.).
Pass the temporarily tightened bolts through the slotted attachment holes of the arm.
The left arm and right arm are shaped differently, so check the shape when attaching the arm to the leg.
Slide the arm in the direction indicated by the arrow to fit the bolts into the slots.
10 mm
(0.4 in.)
10 mm
(0.4 in.)
Arm to attach to the left side as seen from
the rear of the machine
Pass the temporarily tightened bolts through these holes.
Arm to attach to the right side as seen from
the rear of the machine
Slide the arm in the direction indicated by the arrow.
