< 2Q
Pattern Phrase Setting Contents Request
Function: Pattern Phrase setting contents request
Syntax:
stx2Q:a;
a: Pattern Phrase number
Note:
This is a request for when the phrase type is pattern phrase.
(* refer to PU command)
> 3Q
Pattern Phrase Setting Contents Request
Function: Pattern Phrase setting contents request
Syntax:
stx3Q:a;
a: Pattern Phrase number
Note:
This is a request for when the phrase type is pattern phrase.
(* refer to PS command)
> GQ
Song Phrase Setting Contents Request
Function: Song Phrase setting contents request
Syntax:
stxGQ:a;
a: Song Phrase number
Note:
This is a request for when the phrase type is song phrase.
(* refer to SS command)
= TQ
Time Stamp Request
Function 1: Time Stamp request
Syntax:
stxTQ:a;
a: Phrase number
Note:
Output the recording start time information for the specified phrase. (Refer to 4.4.1 TI
Command.) The AR-3000R outputs an ER command for phrases in which time information
is not recorded.
Function 2: Time Stamp request
If the phrase number is not specified as a parameter, the AR-3000R will output the Time
Stamp information for automatically incremented phrase number by the Phrase Output
Counter.
Syntax:
stxTQ:;
Note:
The incremented value will skip phrase numbers which are not recorded yet, and will be up
to the next recorded phrase number. If the TQ command is used to request output even
after the setting information of the last phrase has been output, the AR-3000R will output
“stxER:101;”.
= CQ
Card Setting Contents Request
Function: Card setting contents request
Syntax:
stxCQ:a;
a: Card in slot
0 Card
in
slot
A
1 Card in slot B
Note:
refer to CS command
AR-3000
R Ver.2.01 R
S-232C Reference - 36
