> CO
Convert Card
Function: Convert
Card
Syntax:
stxDM;
stxCO:a,b;
a: Convert type
0 AR-3000
to
AR-2000
1 AR-2000
to
AR-3000
2 AR-3000 WAV to LINEAR (*)
3 AR-3000 WAV file name (*)
b: Select card
0 Card in slot A to Card in slot A
1 Card in slot A to Card in slot B
* These parameters were added from AR-3000R system version 2.00.
4.2.3 Setting
Commands
Phrase Settings
< SU
Phrase Settings
Function: Phrase
settings
Syntax:
stxSU:a,"b",c,d,e,f,g,h,i,j;
a: Phrase number
b: Phrase name (up to 12 characters)
c: Playback Volume (10 - 100)
d: Delay Time (0S0 - 59S9)
e: Repeat Playback
0 OFF
1 ON
f: Repeat interval (0M0S - 59M59S)
g: Control Output
0 OFF
1 ON
h: Offset time of control output (0M0S - 59M59S)
i: Tempo (5 - 260)
j: Reserved (Only ‘0’)
Example)
stxSU:A001,"ABCDEFGHIJK",100,10S5,1,5M0S,1,5M10S,120,0;
For phrase number “A001”, this sets as follows; Phrase name “ABCDEFGHIJK”,
Playback Volume “100%”, Delay Time “10.5 seconds”, Repeat Playback “ON”, Repeat
interval “5 minutes”,
Control Output “ON”, Offset time of control output “5 min 10 sec”, and Tempo “120”.
Note:
Be sure to specify an already recorded phrase as the phrase number.
> VM
Play Volume Settings
Function: play
Volume
settings
Syntax:
stxVM:a,b;
a: Phrase number
b: Play Volume % (10 - 100)
AR-3000
R Ver.2.01 R
S-232C Reference - 22
