Roland RP302, Руководство пользователя

Страница: 7 / 20

Playing Songs from a USB Flash Drive (Sold Separately)
Connecting a USB Flash Drive
NOTE
• If the USB flash drive contains a large number of song files, it may take
some time for the data to be read.
• Use only single-byte alphanumeric characters in the file names.
1
Using your computer, copy your favorite songs onto your USB
flash drive (sold separately).
This digital piano is able to play back SMFs (Standard MIDI Files) or audio
files (WAV) from a USB flash drive.
Playable formats
Type Explanation
SMF
Standard MIDI files (format 0, 1)
WAV
WAV format, 44.1 kHz, 16-bit linear
2
Connect your USB flash drive to the USB MEMORY port of the
digital piano.
Playing Songs
1
Press the [Song] button.
2
Use the [-] [+] buttons to select a song.
N.01
MEMO
• If you’ve selected an audio file (WAV file), a dot is displayed following the
last digit.
N.02.
The files on the USB flash drive are shown. “
N
” indicates a USB flash drive.
The numbers are assigned automatically. If you later add or delete a file,
the numbers will be automatically reassigned.
• All files on the USB flash drive begin with “
N
.”
• If you use the [-] [+] buttons to make the display indicate “
U
” or “
a
,” files in
the internal memory are displayed.
3
Press the [
s
] button to play the selected song.
The display shows the measure number of the currently playing SMF.
If a WAV file is playing, the elapsed playback time is shown.
1.01
(Example: 1 minute 1 second has elapsed)
Lower the Level of an Audio File’s Central Sound
This feature lets you reduce the loudness of the central sound of the audio
(Center Cancel).
1
When a song is selected, hold down the [
s
] button and use the
[-] [+] buttons to turn this feature “
On
.”
NOTE
This feature does not work perfectly with every song. In some cases it may
be unable to fully eliminate the central sound, or may alter the recording’s
tone quality.
About USB Flash Drives
If you’re using a newly purchased USB flash drive, you must first format it on the RP302.
NOTE
• Never insert or remove a USB flash drive while this unit is turned on. Doing so may corrupt the unit’s data or the data on the
USB flash drives.
• Use a commercially available USB flash drive or a USB flash drive sold by Roland. However, we cannot guarantee that all
commercially available USB flash drives will work with this unit.
Formatting a USB Flash Drive
Here’s how to initialize (format) the entire contents saved on a USB flash drive.
NOTE
• Formatting will erase everything that has been saved on the USB flash drive.
• Before using a new USB flash drive with RP302 for the first time, you must format the USB flash drive.
1
Connect the USB flash drive that you want to format to the USB MEMORY port.
2
While holding down the [Song] button, turn the power on.
Keep holding down the [Song] button until it indicates as “
Svr
” on the display.
To cancel, press the [
y
] button.
3
To execute the format, press the [
s
] button.
When all the LEDs on the buttons are lit, the operation is complete.
4
Turn the power off, then on again.
Bottom panel
7