Roland RP302, Руководство пользователя

Страница: 13 / 20

The settings you’ve changed in Function mode can be restored to their factory-set condition. This operation is called “Factory Reset.”
NOTE
The “Factory Reset” operation will erase all settings stored by the Memory Backup function, as well as all songs you’ve recorded in internal
memory.
1
While holding down the [Metronome] button and the [Split]
button, turn on the power.
Keep holding down the buttons until it indicates as “
Svr
” on the
display.
To cancel, press the [
y
] button.
2
To execute the Factory Reset, press the [
s
] button.
When the Factory Reset has been completed, the display will
indicate “End.”
* Never turn off the power before the display indicates “End.”
3
Press the [
L
] switch to turn the power off , then on again.
°
Specifying the Maximum Volume (Volume Limit)
You can specify the maximum Volume setting. This will prevent undesirably high volumes even if the volume buttons are operated unintentionally.
1
Hold down the Volume [-] button and the Volume [+]
button, and press the [-] [+] buttons to adjust the value.
Value 20, 40, 60, 80, 100
MEMO
This setting is saved automatically when you change it.
°
Restoring the Factory Settings (Factory Reset)
13