Roland RD-300NX, Руководство пользователя

Страница: 28 / 96

28
Performance
Playing Multiple Tones with the Keyboard
The RD-300NX features three Internal layers (UPPER 1, UPPER 2, and LOWER),
and one tone can be assigned to each of these layers.
You can perform using combinations of tones by turning each layer on or off.
You can have multiple tones layered together at the same time, and even have
different tones played in the left and right parts of the keyboard.
Performing with Layered Tones (Dual Mode)
This mode lets you play the UPPER 1 and UPPER 2 tones layered across the entire keyboard.
2 1
1. Press the [Dual] button, getting the indicators to light .
Try fingering the keyboard.
The Tones for UPPER 1 and UPPER 2 are layered and played.
2. Press the [Dual] button once more, and the indicator light goes out .
The Tones for UPPER 1 played.
MEMO
You can also layer three tones by adding the LOWER tone. For details, refer to “Selecting the Layer that You want to Sound (Layer Switch)” (p. 29).
Playing Different Tones in Two Different Sections of the Keyboard (Split Mode)
Such a division of the keyboard into right- and left-hand sections is called a “Split,” and the key where the division takes place is called the “Split Point.”
While in Split mode, a sound played in the right side is called an “UPPER part,” and the sound played in the left side is called a “LOWER part.” The
split-point key is included in the LOWER section.
The Split Point has been set at the factory to “F#3.”
MEMO
You can change the split point. Please refer to “Changing the Keyboard’s Split Point” (p. 29).
2 1
1. Press the [SPLIT] button, getting the indicator to light .
Try fingering the keyboard.
The UPPER tone plays in the right-hand section of the keyboard, and the
LOWER tone plays in the left-hand section.
2.
To exit Split mode, press the [SPLIT] button once more, and the indicator light goes out .
UPPER 1
UPPER 2
LOWER
Split Point (F#3)
LOWER UPPER 1