RD-170
Edit parameters and Setup memories
26
r
(2) Press the
[UPPER]
(red) or
[LOWER]
(green)
button to select the part whose setting you
want to change.
(3) Use
[DEC÷NO]
/
[INC÷YES]
to set the send level
value (0~127). Simultaneously press
[DEC÷NO]
and
[INC÷YES]
to select
off
if the selected
part should not transmit any CC93 value
when you select the Setup memory in ques-
tion (this is the default setting).
(4) Press
[EXIT]
(or
[EDIT]
) to leave the Edit mode
or select the other part and change its setting
too.
Note:
This setting can be saved (see p. 28).
Note:
If there is no audible change, you may have to
check the Chorus effect settings on the receiving MIDI
instrument.
Note:
Not all MIDI instruments have a Chorus effect
and even if they do, they may not support this control
change number (this is especially true of older instru-
ments).
Pedal/slider filters (TR)
→
[MIDI]
Here are three parameters that allow you to specify
whether (
on
) or not (
off
) the damper pedal, foot-
switch (or expression pedal) and/or PART LEVEL slid-
ers should
transmit
(TX) the corresponding MIDI
messages:
(1) Press
[EDIT]
(lights), followed by
[10]
,
[11]
or
[12]
.
Press and hold the numeric button in question
to display the abbreviated function name.
(2) Press the
[UPPER]
(red) or
[LOWER]
(green)
button to select the part whose setting you
want to change.
(3) Use
[DEC÷NO]
/
[INC÷YES]
to select
on
(transmit)
or
off
(do not transmit).
(4) Press
[EXIT]
(or
[EDIT]
) to leave the Edit mode
or select the other part and change its setting
too.
Note:
This setting can be saved (see p. 28).
[10]
CC64
Footswitch connected to the PEDAL
DAMPER socket.
[11]
CC66
CC67
CC11
Sostenuto
Soft
Expression
Footswitch or pedal connected to the
SOFT/EXPR. socket. Its function depends
on the setting selected for “Second
pedal” (p. 22) and “Pedal detection”
(p. 30).
[12]
CC07
PART LEVEL sliders
off
Sustain tr
2nd pedal tr
Slider tr
RD-170 OM_GB Page 26 Monday, March 17, 2003 10:23 AM
