44
Other Functions
Turning Off the Power from the Menu
In addition to using the [POWER] switch on the P-20HD to shut down
the power, you can also power down this unit from the menu.
This method is useful when you want to turn the power on/off
from the primary side of the AC adaptor. Leave the [POWER] switch
pressed in, and instead turn off the power from the menu.
1 .
Press the [MENU] button
Ó
“System”
Ó
select
“Shutdown,” and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 .
Select “OK,” and press the [VALUE] knob.
The unit turns off.
MEMO
To turn on this unit normally using the [POWER] switch, press the
[POWER] switch once, and then press it again once the switch is in
the off position.
Using a Footswitch
You can use a footswitch connected to the CTL/EXP 1 and 2 jacks to
control the P-20HD with your foot. You can assign various functions
to the footswitch.
MEMO
¹
See “Connecting a Footswitch” (p. 4) for how to connect a
footswitch to this unit.
¹
If a single-pedal type footswitch such as the BOSS FS-5U is
connected using a phone cable (mono), the function assigned by
“CTL B” is enabled.
1 .
Press the [MENU] button
Ó
“Ctl/Exp”
Ó
“Ctl/Exp 1”
or “Ctl/Exp 2”
Ó
select “Ctl/Exp Type,” and press the
[VALUE] knob.
2 .
Select “Ctl A & Ctl B” (the footswitch), and press the
[VALUE] knob.
3 .
Select “Ctl A Assign” or “Ctl B Assign,” and press the
[VALUE] knob.
4 .
Select the function that you want to assign to CTL
A or CTL B of the footswitch, and press the [VALUE]
knob.
* For details on the menu items, refer to “13: Ctl/Exp” (p. 62).
5 .
Press the [MENU] button to close the menu.
