manualshive.com logo in svg

Roland OCTAPAD SPD-30, Руководство пользователя

Поделиться
Скачать
Roland OCTAPAD SPD-30 Скачать руководство пользователя страница 14

14

23: STEP PHASER

This is a stereo phaser. The phaser effect will be varied gradually.

Knob

Parameter

Value

Explanation

Mode

4-STAGE, 8-STAGE, 

12-STAGE

Number of stages in the phaser

[Knob 2]

Manual

0–127

Adjusts the basic frequency from which the sound will be modulated.

Rate BPM Sync

OFF, ON

OFF: Rate specified as numerical value 

ON: Rate specified as note value

Rate

0–127, note

Frequency of modulation

Depth

0–127

Depth of modulation

Polarity

INVERSE, SYNCHRO

Selects whether the left and right phase of the modulation will be the same or the 

opposite.
INVERSE: The left and right phase will be opposite. When using a mono source, 

this spreads the sound. 

SYNCHRO: The left and right phase will be the same. Select this when inputting a 

stereo source.

[Knob 3]

Resonance

0–127

Amount of feedback

Step Rate BPM 

Sync

OFF, ON

OFF: Step Rate specified as numerical value 

ON: Step Rate specified as note value

[Knob 1]

Step Rate

0–127, note

Rate of the step-wise change in the phaser effect

Wet Low Gain

-15–+15 dB

Amount of boost/cut for the effect sound’s lower range

Wet High Gain

-15–+15 dB

Amount of boost/cut for the effect sound’s upper range

Mix

0–127

Level of the phase-shifted sound

Level

0–127

Output Level

24: INFINITE PHASER

A phaser that continues raising/lowering the frequency at which the sound is modulated.

Knob

Parameter

Value

Explanation

Mode

1, 2, 3, 4

Higher values will produce a deeper phaser effect.

[Knob 1]

Speed

-100–+100

Speed at which to raise or lower the frequency at which the sound is modulated 

(+: upward / -: downward)

[Knob 2]

Resonance

0–127

Amount of feedback

[Knob 3]

Depth

0–127

Depth of modulation

Pan

L64–63R

Panning of the output sound

Low Gain

-15–+15 dB

Amount of boost/cut for the low-frequency range

High Gain

-15–+15 dB

Amount of boost/cut for the high-frequency range

Level

0–127

Output Level

Содержание OCTAPAD SPD-30



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды