Roland Music Atelier AT-45, Руководство пользователя

Страница: 18 / 228

18
Before You Start Playing
Using Headphones
The AT-45 features a Phones jacks. These allows you to play
without having to worry about bothering others around you,
even at night.
fig.00-29
1.
Connect your headphones to the Phones jack
underneath the left side of the keyboard.
The sound from the built-in speakers stops.
Now, sound is heard only through the headphones.
fig.00-30
2.
Adjust the headphones volume with the [Master
Volume] knob and Expression pedal.
Accepts connection of Stereo headphones.
Some Notes on Using Headphones
fifig.00-31
• To prevent damage to the cord, handle the headphones
only by the headset or the plug.
• Headphones may be damaged if the volume is too high
when they are plugged in. Lower the volume on the AT-
45 before plugging in headphones.
• To prevent possible auditory damage, loss of hearing, or
damage to the headphones, the headphones should not
be used at an excessively high volume. Use the
headphones at a moderate volume level.
Using a Microphone
The AT-45 is equipped with a Mic jack.
Since this instrument has a Mic In jack, you can use a
microphone to enjoy a variety of possibilities such as singing
along with your performance, or singing along with SMF
music files (sold separately).
fig.00-32
1.
Connect your microphone to the Mic In jack
underneath the left side of the keyboard.
2.
Use the [Mic Volume] knob to adjust the volume
level for the microphone.
3.
Use the [Mic Echo] knob to adjust the echo level
for the microphone.
The microphone must be purchased separately. When
purchasing a microphone, please consult the vender where
you bought the AT-45.
Some Notes on Using a Microphone
fig.00-31
• To avoid disturbing others, be careful of the volume
level when playing late at night or very early in the
morning.
• When connecting a microphone to the AT-45, be sure to
lower the volume. If the volume control is too high when
the microphone is plugged in, noise may be produced by
the speakers.
• Howling could be produced depending on the location
of microphones relative to speakers. This can be
remedied by:
• Changing the orientation of the microphone.
• Relocating the microphone so it is farther from the
speakers.
• Lowering volume levels.
AT-45_e.book 18 ページ ２００５年２月２１日 月曜日 午後５時４３分