52
3-3 The Replacement of the Consumable Parts
Chapter 3 Maintenance and Adjustment
Head Replacement
In the following cases, the head needs replacement.
The head reaches the end of its life.
The marking pin is worn out.
A General Guide of Head Life
About 4,000 plates can be printed under the following conditions.
Material used : MD-NI (Roland nickel-plated plate)
Printing area : 30 mm (1.1 in.) X 23 mm (0.9 in.)
Print Mode : Photo
Printing rate : 35% (25,000 dots per plate)
In the case of 2D symbol
About 60,000 to 100,000 symbols of 3 mm x 3 mm (H x W) size can be printed
* It depends on the setting of METAZAStudio.
A message that indicates the head life also appears on METAZAStudio.
Click [OK], and the message disappears. Click [Details], and MPX-90M Head Manager appears.
P. 52 "How to check the state of the marking pin"
How to check the state of the marking pin
You can check the state of the marking pin using MPX-90M Head Manager.
Procedure
Start MPX-90M Head Manager.
P. 22, "How to Start The Software"
