Roland ME-US3, Инструкция по установке и подключению, Страница: 7 / 8

5
Troubleshooting
Cutting Data Was Deleted during Cutting
Has the Z (depth direction) movement speed been set to 1 mm/s (0.04 in./s) or less?
Was cutting paused for 30 minutes or more?
With either of the usage methods listed above, the cutting data may be deleted during cutting. Change
the computer settings.
Procedure

In the Start menu search box, enter "Device Manager."
Click [Device Manager].
The [Device Manager] window appears.

Under [Ports (COM & LPT)], double-click [USB
Serial Port (COMx)].
[COMx] is the same as the note that you made in
step

on page 4.

Click the [Port Settings] tab.
Click [Advanced].