Roland ME-US3, Инструкция по установке и подключению, Страница: 4 / 8

2
Installation Procedure
Procedure Overview
Windows-based driver for the modeling/engrav-
ing machine to connect is not installed
Windows-based driver for the modeling/engrav-
ing machine to connect is installed
1
Installing the ME-US3 Driver
(P. 2)
1
Uninstalling the Windows-based Driver
(separate document)
2
Installing the Windows-based Driver
(separate document)
2
Installing the ME-US3 Driver
(P. 2)
3
Installing the Windows-based Driver
(separate document)
Installing the ME-US3 Driver
Procedure

Log on to Windows as the computer's administrator (or as an "Administrators" account).

Insert the Roland Software Package CD-ROM into the disk drive (CD-ROM, DVD-RW, etc.) of the
computer.
(When the automatic playback window appears, click [Run menu.exe].)
The setup menu appears automatically.

If the Windows-based driver for the modeling/engraving machine to connect is installed, unin-
stall it.
For the uninstallation method, see the explanation of how to uninstall the corresponding driver.
If the Windows-based driver is not installed, go to step

.
At this time, do not connect the ME-US3 to the computer. If the connection is made before you in-
stall the ME-US3 driver, the driver installation will fail. Make the connection according to the instruc-
tions during driver installation.