14
Jan. 2014
ME-80
Verifying the Version
1.
Turn down the
OUTPUT LEVEL
control all the way counterclockwise
(minimum).
2.
Hold down
WRITE
and press
POWER
for 1 second or longer.
The version appears on the 7-segment LED display.
Examples of version indication
3.
After verifying the version, press
POWER
for 1 second or longer and
switch off the power.
Virus Check
Before connecting your computer to the ME-80, carry out a virus check
on the ME-80. If it has been infected by a virus, format it after obtaining
permission from the end user. For the formatting procedure, refer to
Data Backup and Restore
Operations
User data (patches and setting data) can be backed up by using special
software for the ME-80.
You can download the special software from the Roland website (http://
www.roland.co.jp).
For detailed information on usage, carefully read the Readme included in
the downloadable file and use accordingly.
Performing a Factory Reset
1.
Press
POWER
for 1 second or longer and start the unit normally.
2.
Depress the pedal
MEMORY/MANUAL
several times to switch to the
manual mode.
The
MANUAL
LED lights up.
3.
Hold down
EDIT
and depress pedal
3
.
FA
appears on the 7-segment LED display.
4.
Press
WRITE
.
The triangular LEDs to the left and right of the 7-segment LED display
flash.
5.
Press
WRITE
a second time.
The 7-segment LED and the triangle LEDs on the left and right flash, and
a factory reset is executed.
* Never switch off the power while the Factory Reset operation is being executed.
When the factory reset finishes, the unit returns to the ordinary state at
startup.
Updating the System
Items Required
• Computer (running Windows)
• USB cable
• AC adaptor (PSA-***S)
• Update program (obtained via Service Net)
Procedure
* Never switch off the power to the unit while the update is in progress.
1.
Import the update program (
ME80ROM.BIN
and
ROMINFO.TXT
) into
the computer.
2.
Connect an AC adaptor (PSA series).
3.
Hold down
EXIT
and
WRITE
and switch on the power.
Verify that
UP
appears on the 7-segment LED display.
4.
Using the USB cable, connect the ME-80 and the computer.
Verify that the reading on the 7-segment LED display changes to
U.P
and
the dot is flashing.
5.
Copy the update programs (
ME80ROM.BIN
and
ROMINFO.TXT
) to the
BOSS_ME80
folder recognized by the computer.
6.
End the USB connection using the proper procedure for Windows.
The
PEDAL FX
LED lights up.
7.
Press
WRITE
.
The update starts.
* Never switch off the power while the update operation is in progress.
When the
MANUAL
LED flashes and a screen like the one shown below
appears, the update has finished.
fig.sys-UP.eps
8.
Switch off the power.
Test Mode
Items Required
• Oscilloscope
• Noise Meter
• Monitor Speakers
• Oscillator
• 47-k
Ω
short plug (standard monaural)
• Computer (running Windows)
• ME-80 driver
* Obtain this from one of the following web pages, and install it on the computer
described above.
http://www.roland.co.jp/
http://www.roland.com/
• Tester (Ammeter)
• Stabilized power supply
• Cables for connecting the items just described
• AA dry-cell batteries x 6
7-segment LED display
Version
1.0
1.0
1.1
1.1
1.2
1.2
Содержание ME-80
