119
Chapter 6 Creating and Editing Songs
Chapter 6
If the following message appears
If you try to display another screen after you’ve changed the
song’s settings for each Part, a message like the one below
may appear.
fig.m-songmod.eps
Touch <OK> to change the song’s settings.
Touch <Cancel> to discard the changes you’re made.
■
Getting the Most Suitable Part
Tones for the Musical Genre
(Tone Set)
“Tone Set” is a function that automatically assigns the most
suitable tones for the selected musical style.
When you’re creating a song, you can assign Tone sets, then
change the Tones to suit the ideas you have for your song.
1.
Display the 16-track Sequencer screen (p. 117).
2.
Touch <Tone Set> in the lower part of the screen.
A screen like the one shown below appears.
fig.d-16trtone.eps_50
3.
Touch the screen to select a musical genre.
4.
Touch <Exit>.
The 16-track Sequencer screen appears.
Tones for each part are assigned automatically.
* In some genres, some parts may have no tone assigned.
■
Recording a Performance
❍
Step 1 Prepare for Recording
Selecting the song to record
1.
Press the [Select/Listen to a Song] button.
2.
Touch the genre of the song you’re recording.
When recording a new song, try recording to
“Favorites.”
3.
Select the song number to which you want to record.
If recording a new song, touch <0: (Song Name)> to
select <0: New Song>.
fig.d-songnew.eps_50
→
If a song has already been recorded, or if the song’s settings
have been changed, the “OK to delete Song?” confirmation
prompt appears when you touch <0: (Song Name)>. For more
information, take a look at “If the following screen appears” (p.
95).
Determining the song’s beat and tempo
4.
Press the [Metronome] button to select the beat (p. 44).
→
You can’t change a song’s beat once it’s been recorded. If you
want to compose a song whose beat changes partway through
the song, take a look at “Changing the Beat in the Middle of a
Song (Beat Map)” (p. 131).
5.
Press the Tempo [-] and [+] buttons to set the basic
tempo of the song.
If you do not need the metronome sound, press the
[Metronome] button once more.
→
When using song data that has already been recorded, the
recording is made using the source song’s basic tempo. To
change the basic tempo of a song, please refer to “Changing the
Tempo of Recorded Songs” (p. 132).
KR-7_5_e.book 119 ページ 2004年7月7日 水曜日 午前10時3分