11
PARAMETER
BUTTON
The PARAMETER button allows
editing of all the parameters for a Tone
as well as some of the Global
Parameters. A parameter is made up
of three sections.
1) a 'G' number. These are selected
using the Group buttons 1-8.
2) a 'B' number. This number is
selected from the Bank buttons 1-3
3) a 'T' number. This number is
selected using the Tone buttons 1-8.
Every parameter will have an ID. For
example the VCF cutoff looks like 212
(G2B1T2). To get to this parameter for
editing press Parameter, Group button
2, Bank button 1, Tone button 2 in that
order. The value of the cutoff can now
be changed using the EDIT SLIDER.
If edits are made using the PG-800 the
parameter being edited will be
identified on the display using the
same numbering system.
Also see the Quick Edit Button.
CONTROL BUTTONS
HOLD BUTTON
Edit Letter “W”
The HOLD button will toggle HOLD
mode. The LED will be on when
HOLD is on.
During Name Editing this button will
select the letter W
ARP BUTTON
Edit Letter “X”
This button will toggle the ARP On
and Off. The LED will be on when
the ARP is playing.
During Name Editing this button will
select the letter X
SEQ BUTTON
Edit Letter “Y”
This button will toggle the SEQ On
and Off. The LED will be on when
the Sequence is playing.
During Name Editing this button will
select the letter Y
KEY MODE BUTTON
Edit Letter “*”
The KEY MODE button will rotate
around 5 Key Mode types.
POLY SINGLE
– Each note played
will select a single sounding voice.
Voice assign parameters 421 – 423
will effect how notes are assigned.
POLY DUAL
– Each note played
will select two sounding voices.
POLY TRIPLE
– Each note played
will select three sounding voices.
UNISON
– Only the last note
played will select 6 sounding
voices.
SOLO
– Only the last note played will
select 1 sounding voices.
During Name Editing this button will
select the symbol '*'
www.kiwitechnics.com
JX-8P Upgrade User Manual v130
