4
13.
Adjust the striking point for the beater.
The beater’s striking point is adjusted to fall at the center
of the head.
Adjust the striking point so that it doesn’t extend beyond
the cushion on the back of the head.
With the KD-85, you can also play using a twin (double kick)
pedal.
Set this up so the striking points of the two beaters fall at equal
distances to the left and right of the center of the head.
When using a twin (double kick) pedal, as with a regular
pedal, use the included beater or a plastic beater as the
beater for the kick pedal.
fig.Twin
As needed, adjust the sensitivity parameter of the sound
module.
Connecting to a percussion sound module (TD-20, TD-12, TD-
10, TD-8, TD-6V/6, TD-3, etc.).
When you have finished connecting to your percussion sound
module, refer to the Owner’s Manual supplied with the sound
module, and make the settings for it.
• To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
• Use the included cable to make connections.
• Connect the L-shaped plug of the included cable to the
KD-85. This will prevent strain from being applied to the
KD-85.
• Make sure that KD-85 does not touch the drum stand or
the other pads.
If you wish to connect two KD-85 units to trigger inputs
1/2 (KICK 1/2) of the TD-8, please use the optional cable
(PCS-31) or standard insert cable. The white plug is for
trigger input 1, and the red plug is for trigger input 2.
When Using a Twin (Double Kick)
Pedal
To Obtain More Stability
If you are using a kick pedal with an under plate
Adjust the length of the legs and the angle of the stay so
that the four legs of the KD-85 and the heel of the kick
pedal contact the floor evenly.
Connecting to a Percussion
Sound Module
Percussion Sound Module
Trigger Input
TD-20
1 (KICK)
TD-12
1 (KICK)
TD-10
1 (KICK)
TD-8
1/2 (KICK 1/2)
TD-6V/6
1 (KICK)
TD-3
KICK
KD-85_e 4 ページ ２００５年５月１２日 木曜日 午前１０時４７分
