Roland JX-3P, Руководство пользователя

Страница: 19 / 57

19
Arpeggiator
The KiwiTechnics 3P Upgrade has a
built in Arpeggiator that can be applied
to any sound.
Arpeggiator Mode is entered by
pressing and releasing the Tape button
and then pressing the Hold button.
The Hold button will begin to flash. Note
- if Hold Mode is applied during Arp
Mode the Hold Mode Light will override
the Arp Mode light and the Hold light
will stay on. This will not effect Arp
Mode which is still active.
The clock for the Arpeggiator can be
chosen from a number of sources using
Global A-7. These can be Int/Ext,
Pattern, LFO2 or the midi clock divided
by 3, 4, 6, 9, 12, 18, 24, 36 48, 72, 96,
128, 144, 168 or 192.
The behavior or the Arpeggiator can be
set using Global A-5 to set the style and
Global A-6 to set the range. The style
can be up only, down only, up & down
and random. The range can be 0-2
octaves.
Canceling Arpeggiator Mode .
Arpeggiator mode can be cleared by
pressing and releasing the Tape button
and then pressing the Hold button.
Note - If the Arpeggiator notes held
are spread over more than 1 octave
and more than one octave is
selected in the Arp Range the notes
played will be as follows. All the first
octave notes held will play followed
by the same pattern moved up one
or two octaves. The result of this will
be the first note of the second pass
can be lower than the last note of
the first pass. This can sound odd if
you have selected one direction for
the Arp Mode.
www.kiwitechnics.com 3P Upgrade User Manual v400