Manual Version 3.21
Page. 4 of 73
1.2 IMPORTANT NOTES
•
The appropriate power supply for this unit is shown on its name plate. Ensure that the line voltage in your
country meets the requirement.
•
Do not use the same mains power socket as any device which inherently generates noise (such as high
voltage switching, motors, lighting system dimmers etc.).
•
The unit may not work correctly if turned on immediately after it is turned off. If this happens, simply turn it off,
wait 10 seconds and turn it on again.
•
Before connecting the unit to other devices, switch all of them off.
•
The unit may generate slight heat when in operation. However, this is not cause for concern.
•
To clean, use a soft cloth and use only mild detergent.
•
Avoid use of any solvents (such as paint thinners etc.) on any surface of the device.
•
Avoid using the unit in excessive heat or humidity conditions or where it may be affected by direct sunlight or
excessive dust.
•
Save your sound data to a cartridge or make a data dump before having the JX-10 repaired, in case the
internal memory should happen to be accidentally erased.
•
Before connecting or disconnecting the cartridge, be sure to set the Protect Switch to the ON position. To
prevent the accidental loss of the data, never move the Protect Switch to the OFF position, unless specifically
instructed to in the manual.
