Roland Jupiter-80 Скачать руководство пользователя

Страница: 79 / 108

oduc

tion

Pla

ying S

ounds

Editing S

ounds

ther C

venien

Func
tions

Connec

ting O

ther

Equipmen

ppendix

Settings and Convenient Functions

Access the MENU screen to select the desired setting or function.

In the MENU screen (p . 34), touch the desired function .

The settings and functions are listed below.

Menu

Explanation

Page

System

Make overall settings for the entire

JUPITER-80.

p. 83

Regist Button Lock

Lock the Registration buttons.

p. 81

Regist Set Exchange

Exchanges Registration Sets.

p. 82

Backup

Backs up the JUPITER-80’s settings to a

USB flash drive.

p. 79

Restore

Restores the JUPITER-80’s settings from

a USB flash drive.

p. 80

Format USB Memory

Format the USB flash drive that’s

connected to the USB MEMORY

connector.

p. 81

Touch Screen

Calibration

Calibrates the touch panel.

p. 82

Factory Reset

Resets the JUPITER-80 to its factory

settings.

p. 87

Backing Up All Settings to a USB

Flash Drive

You can back up all of settings in the JUPITER-80 to a USB flash drive

(sold separately), or restore those settings into the JUPITER-80’s

memory.

MEMO

One set of backup data can be saved on a USB flash drive.

NOTE

• When you execute the backup operation, the backup data that

is currently saved on the USB flash drive will be overwritten. If

you want to keep the backup data that’s on the USB flash drive,

copy it to your computer as described in “Backing Up USB Flash

Drive Data to a Computer” (p. 80).

• Never insert or remove a USB flash drive while this unit’s power

is on. Doing so may corrupt the unit’s data or the data on the

USB flash drive.

• Carefully insert the USB flash drive all the way in-until it is firmly

in place.

• Use USB flash drive available from Roland. Proper operation

cannot be guaranteed if other USB device is used.

• Don’t connect anything other than a USB flash drive to the USB

MEMORY connector.

In the MENU screen (p . 34), touch <Backup> .

The Backup screen will appear.

Touch <EXEC> .

A message will ask “Are you sure?”

To execute, touch <OK> .

NOTE

Never turn off the power while the backup operation is

occurring.

Содержание Jupiter-80













































































































Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды

Roland Jupiter-80, Руководство пользователя

Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды