Roland Jupiter-80 Скачать руководство пользователя страница 87

Страница: 87 / 108

The JUPITER-80’s System Settings

oduc

tion

Pla

ying S

ounds

Editing S

ounds

ther C

venien

Func
tions

Connec

ting O

ther

Equipmen

ppendix

LIVE SET/TONE BUTTONS

Here you can specify the sounds (Live Sets or tones) that will be

assigned to the Part sound buttons (Upper, Lower, Solo).

MEMO

The sounds you specify here will be saved as system parameters

(settings for the entire JUPITER-80). If you specify sounds within

a Registration, the Registration settings will take priority.

REFERENCE

• “Using the Part Sound Buttons to Switch Live Sets or the Solo

Part’s Tone” (p. 36)

• “Instantly Switching the Variation Sounds (Alternate Button)” (p.

37)

Parameter

Explanation

SOLO

Specifies the sounds that will be assigned to the Solo Part sound

buttons.

SOLO Alternate

Specifies the sounds that will be assigned to the sound buttons

when the Solo Part [ALTERNATE] button is pressed.

UPPER

Specifies the sounds that will be assigned to the Upper Part

sound buttons.

UPPER Alternate

Specifies the sounds that will be assigned to the sound buttons

when the Upper Part [ALTERNATE] button is pressed.

LOWER

Specifies the sounds that will be assigned to the Lower Part

sound buttons.

LOWER Alternate

Specifies the sounds that will be assigned to the sound buttons

when the Lower Part [ALTERNATE] button is pressed.

PERCUSSION

Specifies the sounds that will be assigned to the Percussion Part

sound buttons.

INFORMATION

Here you can view information such as the JUPITER-80’s software

version and the amount of free space available on the USB flash

drive.

Version

Shows the JUPITER-80’s software version.

USB Memory

Shows the amount of free space available on the USB flash drive.

Restoring the Factory Settings

(Factory Reset)

This “Factory Reset” operation will restore all settings of the

JUPITER-80 to their factory-set state.

NOTE

When you execute the Factory Reset operation, all data in the

JUPITER-80 will be lost. If there is any data that you want to

keep, back it up to a USB flash drive (p. 79).

In the MENU screen (p . 34), touch <Factory Reset> .

The FACTORY RESET screen will appear.

Touch <EXEC> .

A message will ask “Are you sure?”

To execute the factory reset, touch <OK> .

NOTE

The factory reset operation will take several minutes. Never turn

off the power before the factory reset has been completed.

When the factory reset has been completed, the following screen

will appear.

When the message “Please Power Off!” appears, turn the

JUPITER-80’s power off, then on again .

Содержание Jupiter-80













































































































Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды

Roland Jupiter-80, Руководство пользователя

Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды