Roland Jupiter-80 Скачать руководство пользователя

Страница: 17 / 108

Getting Acquainted with the JUPITER-80

oduc

tion

Pla

ying S

ounds

Editing S

ounds

ther C

venien

Func
tions

Connec

ting O

ther

Equipmen

ppendix

USB Memory Song Player/Recorder

The USB Memory Song Player/Recorder plays back audio files (WAV, MP3, AIFF) that you’ve copied from your computer to a USB flash drive.

Copy to a USB Memory

Insert USB Memory

MP3/WAV/AIFF

You can also record the JUPITER-80’s performance and save it on a USB flash drive as a WAV file.

NOTE

Use USB Flash Memory sold by Roland. We cannot guarantee operation if other products are used.

Audio files that can be played

MP3
Format

MPEG-1 audio layer 3

Sampling Frequency

44.1 kHz

Bit Rate

32k, 40k, 48k, 56k, 64k, 80k, 96k, 112k, 128k, 160k, 192k, 224k, 256k, 320 kbps / VBR (Variable Bit Rate)

WAV/AIFF
Sampling Frequency

44.1 kHz, 48 kHz, 96 kHz

Bit

8, 16, 24-bit

MEMO

Use only single-byte alphanumeric characters in file names and folder names.

Audio files that will be saved

WAV
Sampling Frequency

44.1kHz

Bit Rate

16-bit

Data Saved in USB Flash Drive

A USB flash drive can hold audio files, MIDI files that you want to import as user arpeggio styles, and the JUPITER-80’s internal memory data that

you’ve backed up.

USB Flash Drive

ROLAND Folder

Audio Files

MIDI Files

This folder is created when you make a backup (p. 79).

This contains the backup file for the JUPITER-80’s internal memory.

WAVE files created by the USB memory song player/recorder and audio files or

MIDI files copied from your computer are saved here.

Copy your audio files (WAV, MP3, AIFF) to the root folder (the top level) of your USB flash drive, or create a folder

on your USB flash drive and copy the files into it.

MEMO

• Use only single-byte alphanumeric characters in file names and folder names.
• A maximum of 200 files can be recognized in a folder.

Содержание Jupiter-80













































































































Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды

Roland Jupiter-80, Руководство пользователя

Результаты поиска

Содержание Jupiter-80

Отзывы:

Похожие инструкции для Jupiter-80

Бренды по названию

Популярные бренды