16
•
SONG mastering-effect patch—
that’s stored with the song. This is
handy because you can be sure it’ll be there whenever you load
the song, even on someone else’s JUNO-Gi. However, a SONG
effect won’t be available for other songs. Each song can hold 10
SONG mastering-effect patches.
7
Select the type of mastering-effect patch you want to use.
8
Select the specific patch you want. You’ll likely be able to find one
optimized for the type of music you’re doing.
If you’d like to quickly turn the mastering effect on and off to hear
the difference it’s making to your mix, press 6 (SWITCH) and press 1
(MASTER) to toggle it on and off.
9
If you’d like to customize the selected patch for your needs, see
“Editing a Mastering-Effect Patch” below.
10
Press
9
to return to the start of the song.
11
Press the REC button, and then PLAY—the JUNO-Gi begins recording
your mastered mix onto the selected tracks’ V-Tracks.
12
When you reach the end of the song, press STOP.
After a moment or two, the JUNO-Gi asks, “Export?”
13
Press 6 (EXEC) and assign your mastered mix a name.
14
When you’re ready, press 6 (EXEC) and then 5 (EXEC) for confirmation—
the JUNO-Gi exports your mastered song to your card’s EXPORT
folder as a stereo 16-bit, 44.1 kHz .WAV file that can be burned onto
a CD, converted for use on a personal music player, uploaded, or
emailed.
Editing a Mastering-Effect Patch
1
After selecting a mastering-effect patch to start with, press
6
and
then
3
and/or
4
to highlight an effect module whose settings you
want to change.
3
Use the
3
,
4
,
5
, and/or
6
buttons to highlight the Target Track
value, as shown on the next page:
4
Set the Target Track to which you want to master.
(In the illustration above, we’ll be mastering on Tracks 1/2. Mastering
is always in stereo.)
5
Highlight the target V-Track value, and set it to the desired V-Track.
We’re going to be mastering onto V-Track 8
belonging to Tracks 1 and 2.
If you select a V-Track that already contains a recording, you’ll see a
next to its name. Unless you want to replace what’s currently on
the V-Track, select one that doesn’t have a
.
6
Press 6 (EFFECT) to display the MASTERING effect screen on which
you can select a mastering-effect patch.
You can choose a
•
PRST mastering-effect patch—
expertly programmed at the
factory, and that you can customize and save as a USER or
SONG effect. PRST patches can’t be changed, so they’re always
available. There are 10 PRST mastering-effect patches.
•
USER mastering-effect patch—
that you can tweak and save in
the JUNO-Gi for later use with any song. You can store 10 USER
mastering-effect patches in your JUNO-Gi.
