Roland JD-08, Руководство пользователя

Страница: 22 / 64

Using the Arpeggio
22
Arpeggio parameters
Step
buttons
Indication Value Explanation
[1]
rAtE
4
,
8
,
8t
,
16
,
16t
,
32
“
About note
values (p.
37)”
Sets the length of one note for each step that the arpeggio plays.
[2]
NodE
Sets the order of notes that are played.
UP
The notes are played from the lowest key you played to the highest.
doľn
The notes are played from the highest key you played to the lowest.
UP.Dn
The notes are played from the lowest key you played to the highest, and then back
down to the lowest.
rnd
The notes are played in random order.
n.odr
The notes are played in the order in which you play them.
[3]
ShFL -100
–
100
(%)
Sets the timing of the upbeat.
You can create a shuffle rhythm by varying the upbeat timing. Larger values give
more of a bouncing, dotted-note rhythmic feel.
When this is set to “
0
,” the downbeat and upbeat are played at equal intervals.
[4]
rESo
This sets the note value (upbeat note) that the shuffle is based on.
rESo 16th
Sixteenth note
rESo 8th
Eighth note
[5]
Oct -3
–
3
Sets the range in octaves over which the arpeggio plays. Setting this to a “+” value
makes the arpeggio play up an octave from the key(s) you press, and setting this to a
“-” value makes the arpeggio play down an octave from the key(s) you press.
[6]
trns -36
–
36
Shifts (transposes) the arpeggio notes in semitone steps.
[7]
dvr 0
–
100
(%)
Sets the length of each note played by the arpeggiator. Larger values lengthen the
note value (tenuto), whereas smaller values shorten the note value (staccato).
[8]
UELO REAL
,
1
–
127
Sets the velocity of notes played by the arpeggiator.
To make the arpeggio play at the strength (velocity) with which you play the keys,
set this to “
REAL
.”
To make the arpeggio play at the same strength (velocity), set a value from
1
to
127
.
[9]
HoLD
OFF
,
On
When this is set to “
On
,” the arpeggio keeps playing even after you take your hands
of the keyboard.
You can also switch this on/off by pressing the [ARPEGGIO] button while holding
down the [NOTE] button.
●
You can also press a corresponding step button to select the parameter items.
●
To play chords using an external MIDI keyboard connected to this unit, set the MIDI receive and transmit channels
beforehand.