Roland FR-4X, Руководство пользователя

Страница: 4 / 24

4
Introduction
Installing Batteries
If you install ten AA rechargeable nickel-metal hydride batteries,
you’ll be able to perform without connecting the AC adaptor. By
using the FR-4x with its built-in speaker on battery power, you can
play it like an acoustic accordion without connecting a cable.
About the batteries that can be used
5
When using rechargeable nickel-metal hydride batteries
(2000 mAh batteries), you can use the instrument
for approximately five hours if the speaker is on, or
approximately nine hours if the speaker is off (operating
time depends on the conditions of use).
5
When the batteries run low, the display indicates
“Battery Low.”
NOTE
Do not use alkaline batteries or zinc-carbon batteries.
About battery handling
Improper handling of batteries, rechargeable batteries, or
chargers can cause hazards such as electrolyte leakage,
overheating, ignition, or bursting.
Before use, you must read and observe all of the cautions
included with the batteries, rechargeable batteries, or
charger, and use them as directed.
* Rechargeable batteries and chargers must be used only in
the combination of rechargeable battery and charger that
is specified by the manufacturer.
* Power-off the FR-4x when installing or removing batteries.
1.
Remove the cushion from the back of the FR-4x.
2.
Remove the battery case cover.
While pressing downward on the two knobs of the cover, pull it
toward yourself.
3.
Pull the end of the belt that is wrapped around the
battery holder, and remove the battery holder from
the battery case.
Pull
Battery snap
4.
Remove the battery snap of the cord from the
battery holder.
5.
Insert ten rechargeable nickel-metal hydride
batteries into the battery holder.
Insert each battery correctly in accordance with the “+” “-” polarity
markings.
6.
Connect the battery snap to the battery holder.
7.
Insert the battery holder into the FR-4x’s battery
case.
8.
Attach the battery case cover, and attach the
cushion.
* If you handle batteries improperly, you risk explosion and fluid
leakage. Make sure that you carefully observe all of the items
related to batteries that are listed in “USING THE UNIT SAFELY”
and “IMPORTANT NOTES” (leaflet “USING THE UNIT SAFELY” and
Owner’s manual (p. 20)).
* The batteries will not be charged even if you connect the AC
adaptor when rechargeable batteries are installed in the FR-4x.
You must use a commercially available charger to charge
rechargeable batteries.
Turning On the Power
1.
Turn the [VOLUME] knob all the way to the left to
minimize the volume.
If you connect the FR-4x to an amplifier, etc., set its volume to the
minimum value as well.
2.
Press the [
L
] button.
The [
L
] button lights.
* Before turning the unit on/off, always be sure to turn the
volume down. Even with the volume turned down, you might
hear some sound when switching the unit on/off. However, this
is normal and does not indicate a malfunction.
3.
Turn the [VOLUME] knob clockwise to set the
volume to an appropriate level.
4.
Adjust the volume of the connected audio system
(if connected).
* The power to this unit will be turned off automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
Off function).
If you do not want the power to be turn off automatically,
disengage the Auto Off function (p. 5).