manualshive.com logo in svg

Roland Fantom G6, Руководство пользователя, Страница: 151 / 340

Поделиться
Скачать
Roland Fantom G6 Скачать руководство пользователя страница 151

 

151

Adding Effects

 

Over

view

Sound 1

Sound 2

Sound 3

Pad

Sampler

Menu/System

Appendix

Sequencer

Using the pads to switch effects on/off

 

You can use the pads to directly switch each effect on/off. For the 
procedure, refer to the following pages.

 

“11 EFFECT SW (Using the Pads to Switch the Effects)”

 

 (p. 

199)

 

“12 PATCH MFX SW (Using the Pads to Switch Patch Multi-

effects)”

 

 (p. 199)

 

1.

 

In the appropriate mode, select the sound to which you 
want to apply effects.

 

2.

 

Press [EFFECTS (ROUTING)] to access the Effects screen.

 

3.

 

Press one of the [F1 (Routing)]–[F7 (Mastering)] tabs to 
select the effect that you want to edit.

 

fig.22-001_50

 

4.

 

Use [CURSOR] to move the cursor to the parameter you 
wish to modify.

 

5.

 

Turn the VALUE dial or press [INC] [DEC] to get the value 
you want.

 

6.

 

Press [EXIT] to return to the previous screen.

 

F-key operations in the effect screen

Single mode allows you to use patch FX (PFX), chorus, and reverb. 
These effects will operate according to the effect settings of the patch, 
rhythm set, or sample set that’s assigned to the keyboard part.

 

“Specifying How the Sound will be Output (Routing)”

 

 (p. 

151)

In addition, you can apply a multi-effect (MFX1) to the external 
audio input or audio tracks.

 

“Specifying the effect applied to the external audio input or 

an audio track”

 

 (p. 150)

Live mode allows you to use patch FX (PFX), chorus, and reverb. 
These effects will operate according to the effect settings of the live 
set.

 

“Specifying How the Sound will be Output (Routing)”

 

 (p. 

151)

In addition, you can apply a multi-effect (MFX1) to the external 
audio input or audio tracks.

 

“Specifying the effect applied to the external audio input or 

an audio track”

 

 (p. 150)

Here you can make overall settings for effects, and the output 
destination and level of each signal.

 

For details on these settings, refer to 

 

“Making Effect Settings”

 

 

(p. 151).

 

In this screen, the name of the parameter selected by the cursor 

is shown in the “

” area in the lower left of the 

screen. The current value of the parameter is also shown here.

 

Making Effect Settings

 

F-key

Explanation

Page

 

F1 
Routing

Routing edit screen

p. 151
p. 154

F2 
PFX

Patch multi-effect edit screen

p. 157

F3 
MFX 1

MFX 1 edit screen

p. 158

F4 
MFX 2

MFX 2 edit screen

p. 158

F5 
Chorus

Chorus edit screen

p. 159

F6 
Reverb

Reverb edit screen

p. 159

F7 
Mastering

Mastering edit screen

p. 160

F8 
Exit

Returns to the previous screen

–

 

Applying Effects in Single Mode

 

Applying Effects in Live Mode

 

Specifying How the Sound will be 

Output (Routing)

Fantom-G_r_e.book 151 ページ ２００９年７月２日　木曜日　午後２時５５分

Содержание Fantom G6





















































































































































































































































































































































Отзывы:

Нет отзывов