Roland EGX-400, Руководство по установке

Страница: 8 / 24

NOTES:
Configuring Engraving Cutters
™
Place a flat plate under the nosecone and insert
the cutter until it touches the plate.
™
Tighten the cutter to the brass knob. This will zero
the cutter for the proper cut depth for the
Raster
TM
Braille.
™
Remove the brass cutter knob and cutter from the
spindle as one piece. Do not loosen the cutter
from the brass knob.
™
Rotate the nosecone counter clockwise 9 clicks
which will adjust the depth to 0.033” for the
pictogram / raised text cutter.
™
Insert the character cutter and brass knob onto
the spindle and again place a flat plate under the
nosecone and insert the cutter until it touches the
plate.
™
Tighten the cutter to the brass knob. This will zero
the cutter for the proper cut depth for cutting the
pictograms and raised text.